Learn more

 

Learn more about our products

 

KN95 Masks (5pcs)

99% Effective Filtration: Our KN95 masks comply with GB2626-2006 standard and has a filtration efficiency of greater than 99% for gases, dust, pollen, smog, germs and bacteria. The mask protects users from breathing in hazardous materials and reduces their exposure to certain airborne particles including dust and haze and biohazards including bacteria and droplets.

 

4-Layer Purification: The mask features a 4-layer purification made from filament non-woven fabric. It consists of a double layer electrostatic filter and is a highly effective barrier against particles.

 

Ergonomic Design for Extra Comfort: The mask is made of breathable low impedance filter material for easier breathing. The inner layer made of soft facial tissue which is gentle to the skin and does not give off any odour. Extra-soft elastic earloops eliminate pressure on the ears and provide better comfort for the wearer.

 

Secure Seal: The tight-fitting face seal has a flexible soft metal fixation strip at the nose bridge to ensure secure coverage and maximum protection.

 

Usage: Can be used 2 times normally. However, in the case of dense crowds or severe environmental pollution, it is best to use it only once. Once the mask is stained with foreign particles, or if the user feels that breathing resistance is increased or the mask is damaged, it should be replaced immediately. This mask cannot be used for protective filtering against toxic gases and vapours.

 

TGA, FDA & CE APPROVED

 

 

P2 Masks (12 pcs)

 

Effective Filtration: P2 face masks (also known as P2 respirators) are able to filter out PM2.5 fine particles from the air, and is mostly used to reduce the transmission of airborne diseases and on building sites to protect against harmful chemicals. They also protect the user by reducing exposure to bushfire smoke / poor air quality and associated health effects.

 

Secure Fit: The P2 masks are made with a flexible nose clip to ensure a secure fit to form an air-tight seal around the mouth and nose area. This is important to ensure the highest effectiveness in reducing the inhalation of particulate matter.

 

Low Breathing Resistance: Made from advanced filter material, our P2 masks provide effective filtration without restricting breathing. The robust shell design holds firm and is resistant to collapse for extended durability.

 

Usage: Can be used 2 times normally. However, in the case of dense crowds or severe environmental pollution, it is best to use it only once. Once the mask is stained with foreign particles, or if the user feels that breathing resistance is increased or the mask is damaged, it should be replaced immediately. This mask cannot be used for protective filtering against toxic gases and vapours.

 

TGA APPROVED

 

3-Ply Medical Masks (50pcs)

 

99% Bacterial Filtration Efficiency: Our surgical masks has more than 99% Bacterial Filtration Efficiency (BFE) and provides superior protection from potential infection by filtering droplets, pollen, dust and other air particulates.

 

3-Layer Protection: The mask features a 3-ply superfine fiber non-woven fabric. The outer layer is a sanitary-grade polypropylene adhesive proof cloth that is waterproof to block out droplets and moisture. The middle layer is made of high-efficiency filter melt spray cloth and acts as a filter layer. The innermost layer is made of soft fabric and absorbs moisture.

 

Comfort Wear: Elastic earloops are made of a mixture of polyester thread and spandex thread and help eliminate pressure on the ears to provide extra comfort for the wearer. The mask features a flexible soft metal strip at the nose bridge to ensure a better fit.

 

Usage: For single use only. It is highly recommended to replace with a new mask every 8 hours.

 

TGA, FDA & CE APPROVED